Pro Microphones / Pro-Microphones

Rode NT2-A Microphone

RODE NT2-A Microphone

The NT2-A carries on the tradition forged by the now legendary RODE NT2. A professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high pass filter switches conveniently located on the mic body.

At the heart of the NT2-A is the Australian designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50's and 60's. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available.

• Large 1" (25mm) HF1 gold sputtered capsule
• On body control of polar pattern, HPF and PAD
• Three position variable polar pattern - Omni, Cardioid or Figure 8
• Three position variable High-Pass Filter - Flat, 40Hz or 80Hz
• Three position PAD - 0dB, -5dB or -10dB
• Ultra low noise, transformerless surface mount cicuitry
• Wide dynamic range
• Internal capsule shock mounting

Specfications

Power	P48 (48V) phantom supply
Acoustic Principle	Pressure, Pressure gradient
Directional Pattern	Three position variable - Omni, Cardioid or Figure 8
Frequency range	20 Hz - 20 kHz
Output impedance	200ohm
Signal noise ratio	87 dB SPL (A - weighted per IEC651)
Equivalent noise	7 dB SPL (A - weighted per IEC651)
Maximum SPL	147dB SPL (@ 1kHz, 1% THD into 1Kohmload) (157dB with PAD at maximum)
Maximum output voltage	+16dBu (@ 1kHz, 1% THD into 1Kohm load)
Sensitivity	-36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Weight	860gm
Dimensions	209mmH x 55mmW x 55mmD